SMS commands to control the honey collection monitor.

smsSend sms with the latest data to the host’s mobile number.
fullTransfer the device from economical to full mode of operation.
ecoPut the device into economy mode. This mode provides for the device to work with the OLED screen turned off, and a "sleepy" microcontroller that will periodically wake up briefly to transfer data to the bee.in.ua web portal
tare1Calibration of the weight sensor. In this case, you indicate to the device that now the scales are empty containers (beehive). The weight value is reset to zero.
ussd *---#USSD code of your GSM operator to determine the account balance
tel 380xxxxxxxxxWrite host phone number to device memory.
ascale1 0Configured by the device manufacturer. Without much need, do not use this command. Set the starting point of the weight sensor characteristic for its adjustment. In this case, the balance should be empty containers.
ascale1 xxx.xxConfigured by the device manufacturer. Without much need, do not use this command. Set the second point on the characteristic of the weight sensor for its adjustment. At the same time, the scales must have a known weight, which must be indicated in SMS in kilograms.
vcc +x.xxConfigured by the device manufacturer. Without much need, do not use this command. Correction of the measured value of the supply voltage, V. You can enter both positive and negative values.
gmt +2Time zone of device location.